How to install -60°C cryogenic chiller manufacturers equipment
-60℃ 극저온 냉각기
manufacturers are used in the refrigeration and chemical industry, so what
issues should be paid attention to during installation? LNEYA professional
manufacturers tell you that you should install according to the instruction
manual.
For the -60℃극저온 냉각기
compressor (unit) that has been tested at the factory and is protected by
rust-proof seals and has good pre-installation protection measures, it can be
directly installed, the protection measures are invalid, or the compressor (unit)
has obvious defects. Check it and install it after confirming that it meets the
factory manufacturer’s factory standards.
-60℃ 극저온 냉각기
compressor (unit) should check the position of the foundation and anchor bolt
holes before it is in place, it should meet the requirements of the design
documents; it should be installed in the foundation and bracket according to
the connection method required by the design and equipment technical documents.
Welding shall not be used on hangers and on the design and equipment technical
documentation. The installation should meet the requirements of the equipment
technical documents. When leveling is required, the horn should be used. The
installation should keep the body stable and should not exceed the inclination
angle of the technical documentation of the equipment. Do not invert.
-60℃ 극저온 냉각기
compressor (unit) manufacturer to ensure that the compressor does not corrode
after leaving the factory and before use, no impurities, more inert gas for sealing
treatment, so as long as the seal is intact, no obvious defects can be directly
installation. For small, lightweight-50-degree cryogenic unit compressors
(units), manual handling can be carried out during the installation process.
Due to exceeding the limit angle or inversion, internal
irreparable damage may occur, so standard handling is required. Refrigeration
auxiliary equipment such as intercooler, gas-liquid separator, oil separator,
liquid receiver, low-pressure circulating reservoir, oil collector, chiller,
condenser, etc. in the refrigeration system shall be installed in accordance
with current standards.
-60℃ 극저온 냉각기
manufacturers Wuxi Guanya (LNEYA) will be arranged at the factory, the
corresponding instructions to follow the equipment, the user can install
according to the instructions.
관련 권장 사항
-
Necessity of temperature control in fractional distillation of distillation
1014The pharmaceutical and chemical industry involves many chemical reactions, and with the continuous development of the pharmaceutical and chemical industry, there is a great demand for such instruments. The traditional open cooling and heating con...
세부 정보 보기 -
반도체 제조 기업에 가열 서큘레이터 장비가 필요한 이유는 무엇일까요?
1130온도 제어 정확도: 반도체 제조 공정은 온도 제어에 대한 요구 사항이 매우 엄격합니다. 가열 순환기는 정밀한 온도 제어를 제공하여 온도가 일정하게 유지되도록 보장할 수 있습니다.
세부 정보 보기 -
화학 및 제약 생산 공정에서 온도 제어가 필요한 반응에는 어떤 것이 있나요?
1024정밀한 온도 제어는 화학 및 제약 제품 생산에서 합성/결정화 중 반응 공정에서 중요한 역할을 합니다. 정밀 화학 분야에서는 많은 화학 반응 공정과 결정화 공정이 ...
세부 정보 보기 -
저온 사이클 장비 작동의 중요성 설명
1115저온 사이클 장비의 사용은 표준 작동과 분리할 수 없습니다. LNEYA 저온 사이클 장비는 해당 사용 설명서와 함께 배송되며 사용자는 사용시 미리 알 수 있습니다. 저온 ...
세부 정보 보기