Description of high and low temperature circulation tank refrigeration process
In the process of using high and low temperature circulating tanks, there may be some minor problems due to improper use, and there may be problems in the refrigeration process of Wuxi Guanya high and low temperature circulating tanks, and then we will explain them.
Most high and low temperature circulating tanks cool the media for cooling, but some simple techniques that rely on air or water contain a cooling coil that regulates temperature. The high and low temperature circulation tanks are used as a closed loop system for complete packaging, including hot and cold water units, condensers and circulation pumps, high and low temperature circulation tank expansion valves, partial cold water tanks, and temperature control stations. The closed loop industrial screw high and low temperature circulation tank recirculates water cooling equipment and instrument cleaners at constant temperature and pressure, increasing stability and repeatability.

If there is a high temperature difference between the two, the large external tank will be used to store cold water. In this case, the cooling water does not go straight from the cooler application, but goes deep into the outside of the tank as a “temperature buffer sorting behavior. The cold water tank is much larger than the internal water tank. Cold water from the external fuel tank application And returning hot water from the application can be traced back to the external fuel tank, not to the unit.
One of the new developments in high and low temperature circulating tanks is air cooling, not the use of cooling water. In this case, the condenser is not cooled with hot air refrigerant, but is used by a cooling water cooling tower. This development allows for more than 15% and allows for a reduction in energy demand in the cooler due to the small area of surface water, condensers and fans. In addition, the fans allowed a significant reduction in noise levels.
At the same time, the high and low temperature circulation tanks also need to pay attention to the usual maintenance work, so that the high and low temperature circulation tank can exert a large operating power.
관련 권장 사항
-
반도체 온도 제어 장비용 컨트롤러의 기능은 무엇인가요?
813반도체 부품의 온도 제어 장비에서 각 액세서리는 서로 다른 기능을 가지고 있습니다. 기능이 다르기 때문에 LNEYA의 반도체 부품의 온도 제어 밸브 및 컨트롤러의 기능이 다릅니다.
세부 정보 보기 -
고온 저온 테스트 챔버의 가격 분석
1086속담에 "지불한 만큼 얻는다"는 말이 있습니다. " 고온 저온 테스트 챔버의 가격은 구성의 품질과 관련이 있습니다. 우시 LNEYA의 기술 자체는 귀중합니다. 테스트 챔버 산업에서 고온 저온은 ...
세부 정보 보기 -
실험실 냉난방 서큘레이터 선택 가이드
1095실험실 냉각 및 가열 순환기 장비를 구매할 때 핵심은 생산 요구 사항을 충족하고 생산량을 가속화하는 것입니다. 따라서 장비 및 기술 솔루션의 특성을 이해해야합니다 ...
세부 정보 보기 -
How is the electric vehicle battery test driver grounded?
999If the electric vehicle battery test is not isolated between the AC power source and the drive DC bus (such as a transformer), do not connect the non-isolated port of the DC bus or the ground of the non-isolated signal to the ground, which may res...
세부 정보 보기