극저온 냉장고 냉장 시스템은 어떻게 배수되나요?
Users who use ultra-low temperature chillers will encounter some problems when they are not used for a long time, such as poor cooling performance and loud sound. These problems are more common, but some refrigeration systems need to be well understood.
Normally, in order to ensure the normal use of the cryogenic refrigerator, we will perform derusting and sewage disposal before installation. But even this will prevent some dirt such as welding slag, iron filings, and sand from remaining inside the system. Therefore, in order to prevent dirt from being damaged to some original parts such as a compressor, the problem of system piping blockage is avoided. The refrigeration system must be drained after installation.
Drainage work can be divided into pipe group, room unit, system layering or segmental sewage disposal. The general principle is that the dirt is blown clean without damaging the valves and other components.
In order to check whether the coil of the cryogenic refrigerator is clogged, a ball test can be performed. The diameter of the wooden ball used in the test should be smaller than the inner diameter of the pipe and larger than the radius of the pipe. The air in the gas tank can be blown in, and the flow is required to be unimpeded.
In the work of sewage discharge of the ultra-low temperature chiller, if it is found that the pipeline and the valve have obvious air leakage points, it is necessary to weld the welding or tighten the flange of the relevant valve in time. Avoid or minimize the valve to prevent dirt from damaging the seal line of the valve.
After the sewage discharge is completed: Remove the valve core and filter of all valves (except the safety valve). If the seal wire on the alloy or seat of the valve plug is found to be damaged, repair it and re-cast the alloy in severe cases. The steel spool or seat seal line is damaged and can be repaired by grinding.
I believe that everyone has seen the sewage technology of the cryogenic refrigerator system, we will definitely understand this maintenance and help you to use it better.
관련 권장 사항
-
산업용 냉각기 시스템 선택 방법
1150산업용 냉각기 시스템을 구매하고 싶으신가요? 신뢰할 수 있는 산업용 워터 칠러 시스템을 구매하고 싶으신가요? 고품질 산업용 냉각기 시스템을 구입하고 싶으십니까? 구매 방법?1. 공정 요구 사항 장비에 관계없이 LNEYA는 사용자에게 위트 ...
세부 정보 보기 -
LNEYA 고온 및 저온 난방 냉장고 유지 관리 지침
1200고온 및 저온 가열 냉장고는 순환수를 사용하여 매월 정기적으로 순환수를 교체합니다. 열전달 오일을 사용하는 경우 6개월에서 1년마다 주기적으로 열전달 오일을 교체해야 합니다. 높은 ...
세부 정보 보기 -
진공 펌프 온도 제어 시스템 사용에 대한 오해
968When using the vacuum pump temperature control system, only the correct operation method can ensure the normal and stable operation of the equipment. If there are many wrong operation behaviors, it will directly affect the normal use of the equipm...
세부 정보 보기 -
판매용 냉판 냉동고 후 압축기 결함을 처리하는 방법은 무엇입니까?
946극저온 냉장고 냉동 시스템의 작동에서 압축기 고장이 발생하면 극저온 냉장고의 작동에 영향을 미칩니다. 그렇다면 컴프레서에 영향을 미치는 결함은 무엇일까요? 고객은 어떻게 해결합니까?
세부 정보 보기