Is the choice of a centrifugal pump or a volumetric pump in a pharmaceutical laboratory?
Performance:
In order to be able to select the type of pump that is suitable in the pharmaceutical laboratory, it is necessary to have a deep understanding of its performance and understand the difference in its specific working principle. To this end, we must understand that the centrifugal pump is dependent on the pressure (or The variable flow phenomenon of the indenter, while the positive displacement pump has a more or less constant flow phenomenon independent of the pressure.
Viscosity:
The centrifugal pump and the positive displacement pump are also different in viscosity, and the flow rate drops when the viscosity rises, and the positive displacement pump actually causes an increase in the flow rate. This is because the higher viscosity liquid fills the voids in the volumetric pump, resulting in higher volumetric efficiency.
Efficiency:
In pharmaceutical laboratories, it is necessary to consider the effect of pressure on the equipment. After all, different pumps have different characteristics. Different efficiencies will increase the pressure of the pump. For volumetric pumps, as the pressure increases, Efficiency will actually increase, and centrifugal pumps have a better efficiency point. On both sides of this point, the overall pump efficiency will drop significantly.
Entrance conditions:
The pharmaceutical laboratory has different conditions for the inlets of these two types of pumps. The centrifugal pump needs to reserve a certain amount of liquid in the pump to form a pressure difference. The liquid-free dry pump cannot be started by itself, due to the volume. The pump agitates the liquid by the expansion and contraction of the liquid volume, and the negative pressure is formed at the inlet, so the volumetric pump can initiate the perfusion. In some cases, this is the decision whether to choose the volumetric pump or the centrifugal pump. Elements.

The selection of different pumps in the pharmaceutical laboratory is to be selected according to their own needs. It takes a lot of time to get the right choice to get a higher benefit.
관련 권장 사항
-
Glycol chiller installation requirements
1195In the summer, the use of glycol chillers is relatively frequent. Efficient glycol chillers are also needed. Therefore, when installing glycol chillers, they need to be installed on a smooth and tidy floor. Why choose a smooth ground when installi...
세부 정보 보기 -
What are the effects of the oil separator on the equipment analyzed by the chiller manufacturer
912Oil separators use more accessories in thechiller refrigeration system. So as users, we need to understand where the mainimpact is in order to better use the equipment.In the configuration of the chiller, theposition of the oil separator is aft...
세부 정보 보기 -
고온 및 저온 항온 순환 장치에 대한 유지보수 지식
1332고온 및 저온 항온 순환 장치는 온도 제어 시스템에서 가장 일반적인 장비 중 하나입니다. 좋은 장비는 일상적인 유지보수와 떼려야 뗄 수 없는 관계입니다. 그렇다면 유지보수에 대해 얼마나 알고 계십니까? 높은...
세부 정보 보기 -
How does the cooling and heating system achieve simultaneous temperature control?
1062Temperature control system The thermostat has heating and cooling functions, and can use the same medium for continuous temperature control from -120℃~320℃. The heating and cooling system of cooling and heating system is mainly composed of four pa...
세부 정보 보기