공작 기계 스핀들에 냉각기가 필요한 이유는 무엇입니까?

The main reasons why machine tool spindles require a chiller are as follows:
Temperature Control:
During the machining process, the spindle generates a large amount of heat due to high-speed rotation. If not controlled, this heat will cause the spindle temperature to rise, affecting machining accuracy. The chiller absorbs and carries away heat by circulating coolant (usually water or a mixture of water and antifreeze), keeping the spindle within a suitable working temperature range, thereby ensuring machining accuracy and surface quality.
Extend service life:
High temperatures can accelerate the wear of spindle bearings and other components, shortening their service life. The use of chillers can effectively control temperature, reduce thermal expansion and stress, extend the service life of the spindle and its components, and reduce maintenance costs.
Improving efficiency:
A stable temperature environment can improve processing efficiency, avoid processing interruptions or decelerations caused by overheating, and ensure continuous and efficient production.
Protective equipment:
High temperatures may also affect other components of the machine tool, such as electrical components, lubricating oil performance, etc. The use of chillers helps maintain the thermal balance of the entire machine tool system and protects sensitive components from thermal damage.
Environmental Adaptability:
In different seasons or ambient temperatures, the chiller can adjust the cooling needs of the spindle to ensure stable operation of the machine tool under any conditions.
Improve Machining Quality:
Especially in precision machining and high-speed machining, small temperature changes can affect dimensional accuracy and shape accuracy. The precise temperature control capability of the chiller is crucial for improving the consistency of the workpiece and reducing the scrap rate.
In summary, the application of chillers in machine tool spindles is an important means to ensure machining accuracy, improve production efficiency, extend equipment life, and ensure product quality.
Machine Tools Spindle Chiller water chiller oil chiller
LT -45℃~30℃
저온 냉각 서큘레이터 빠른 액체 냉각을 위해 1. 순환 냉장을 위해 물과 혼합 된 에틸렌 글리콜을 사용하여 자원 절약 2. 순환 파이프 라인 설계, 연장 ...
LT -25℃~30℃
Rapid refrigeration using imported brand semi-enclosed piston compressor, semi-enclosed piston two-stage compressor, semi-enclosed screw compressor 1. Can use ethylene glycol mixed …
로딩 중...
이미 마지막 에피소드에 도달했습니다!
로딩 중...
이미 마지막 에피소드에 도달했습니다!
관련 권장 사항
-
감속기 오일 냉각 냉각기란 무엇인가요?
886감속기 오일 냉각 냉각기는 감속기(기어박스)를 냉각하여 작동 중에 적절한 온도를 유지하도록 하는 데 특별히 사용되는 장치입니다. 이 냉각 시스템은 과열을 방지하고 수명을 연장하는 데 매우 중요합니다.
세부 정보 보기 -
모터 테스트용 KRYO 오일 냉각 시리즈
1848응용 분야 전원 배터리 충전 관리를 위해 영구 자석 동기 모터, 스위치 릴럭 턴스 모터, 비동기 모터 및 컨트롤러를 테스트하기위한 정밀 온도 제어 장치는 다음을 실현할 수 있습니다.
세부 정보 보기 -
오일 냉각기는 언제 필요합니까?
521Oil chiller solutions for industrial cooling and lubrication. Improve temperature stability, reduce maintenance, and extend equipment life.
세부 정보 보기 -
전기 자동차 배터리 테스트 드라이버를 접지하는 방법은 무엇인가요?
1066전기 자동차 배터리 테스트가 실행 중이며 액세서리의 작동을 이해하고 드라이브 및 기타 액세서리가 작동 중이어야 합니다. 전기 자동차 배터리 테스트가 A와 B 사이에 분리되지 않은 경우 ...
세부 정보 보기 -
온도 충격 테스트 챔버 고장 성능 설명
1078온도 충격 테스트 챔버는 다양한 주요 산업에서 널리 사용됩니다. 사용자는 구매할 때 온도 충격 테스트 챔버를 오랫동안 사용할 수 있기를 바랍니다. 따라서 온도 충격 테스트 챔버의 각 결함을 이해할 필요가 있습니다. .
세부 정보 보기 -
전기 자동차의 성능 향상을 위한 배터리 테스트를 위한 정확한 온도 제어
886전기 자동차(EV)는 자동차 산업을 완전히 변화시켜 보다 지속 가능하고 에너지 효율적인 운송 수단을 제공합니다. 전기 자동차의 기본 구성 요소 중 하나는 충전식 배터리입니다. 전기 ...
세부 정보 보기 -
5L glass reactor thermal oil heating system
7755L glass reactor is a common laboratory equipment used for various chemical reactions. In order to ensure that the reaction is carried out at the required temperature, it is usually necessary to equip it with a heating system. Thermal oil (a...
세부 정보 보기