Refrigeration and heating temperature control system for multiple reactors
1. There are some differences in the quality and configuration of the refrigeration and heating temperature control systems of multiple reactors from different manufacturers. Some equipment will have some noise during operation, and the noise is largely related to mechanical stress.
2. You can check whether the screws on the base of the equipment are normal, whether the force is uniform, and whether they are fixed. If the screws of the unit are loose, use a wrench to tighten the screws of the lower base.
3. The operator has a clear understanding of the operation instructions and maintenance knowledge of the refrigeration and heating temperature control systems of multiple reactors.
4. Do a good job in the maintenance and cleaning of the key components of the refrigeration, heating and temperature control systems of multiple reactors.
5. Protect the key parts of the equipment. If it is easy to get wet, it is necessary to do a good job of anti-layer work.
6. For the heat preservation treatment of the refrigeration and heating temperature control systems of multiple reactors, due to the large number of internal parts, it is necessary to ask technical personnel to operate under the guidance.
7. In order to obtain better treatment effect, enterprises need to choose good thermal insulation materials when completing thermal insulation treatment. Good thermal insulation effect will help to improve the operation effect of the equipment and reduce the failure rate of the equipment.
8. The installation of the circulating pipeline should facilitate the discharge of the gas in the pipeline. If there is leakage, stop the operation in time and use it after repairing; the electric control cabinet should avoid dust accumulation, and should be regularly purged with compressed air to ensure good electrical contact. Always check the contacts of electric heating tubes, fuses, meters, electric contact pressure gauges, and relays.
Our LNEYA dynamic temperature control system SUNDI series, HR series and WTD series can be used for temperature control of reactors, and one or more units can be controlled at the same time. If you have needs in this regard, you can leave us a message and send an email to sales@lneya.com
Related recommendations
-
Description of the compressor of the high and low temperature damp heat test device
2329Different types of compressors for high and low temperature damp heat test devices often have an impact on price. When choosing, we should choose low-energy refrigeration compressors as much as possible. Now China is paying more and more attention...
View details -
What reactions are microchannel reactors suitable for?
2241In recent years, micro-chemical technology has developed rapidly, and micro-channel reactors have attracted more and more attention. Microchannel reactors are manufactured with the help of special micromachining technology. They have the advantag...
View details -
What if the cooling rate of the cooling and heating temperature control system of the reactor slows
2242LNEYA cooling and heating temperature control system is a laboratory instrument and equipment for temperature control of supporting reactors in pharmaceutical and chemical laboratories and other industries. It adopts a fully closed circulation pip...
View details -
ISG/TM Motor Test Cooling System High Voltage Failure and Treatment Measures
2606The ISG/TM motor test cooling system is divided into two types in the industry: air-cooled and water-cooled. The working principle is to first inject a certain amount of water into the water tank in the machine, and then pass the ISG/TM motor test...
View details
LNEYA Thermo Refrigeration Co.,Ltd












